Single row cylindrical roller bearings

Contact Now

Single row cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are in: the cage design and material; the configuration of the inner and outer ring flanges.Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used around the world. These roller bearings consist of an Outer Race, Bronze or Steel Cage, a complement of rollers, and usually an Inner Race.

The single-row cylindrical roller bearing is one separable type bearing. Generally, a single-row cylindrical roller ring consists of four major components as follows: inner ring, outer ring, rollers, and cage. The rollers are typically guided by two ribs of bearing ring .Single row cylindrical roller bearings Designation system The designations of most rolling bearings follow a system that may consist of a basic designation with or without one or more prefixes and/or suffixes ( Basic bearing designation system ).

Bearing Number	Bore Dia	Outer DIa	Width	Size
45 mm x 85 mm x 23 mm NTN NUP2209ET2XC3U Single row cylindrical roller bearings	203 kN	155 kN	1.5 mm	29 mm
45 mm x 85 mm x 23 mm NTN NUP2209ET2 Single row cylindrical roller bearings	17 mm	850 r/min	135 mm	187 mm
45 mm x 85 mm x 23 mm NTN NUP2209EG1U Single row cylindrical roller bearings	28000 rpm	32.0000 mm	22000 rpm	One Shield
45 mm x 85 mm x 23 mm SNR NUP.2209.E.G15 Single row cylindrical roller bearings	4800 rpm	50.00 mm	1.00 mm	80000 N
45 mm x 85 mm x 23 mm NTN NUP2209EG1 Single row cylindrical roller bearings	0.76 kg	M 65x2	65 mm	KMFE 13
45 mm x 85 mm x 23 mm NTN NUP2209 Single row cylindrical roller bearings	48 mm	33.6 kg	HMV 76E	360 mm
40 mm x 80 mm x 23 mm NTN NUP2208U Single row cylindrical roller bearings	4.763 mm	387.35 mm	13.8 kN	30.163 mm
40 mm x 80 mm x 23 mm NTN NUP2208ET2XU Single row cylindrical roller bearings	mm	1310 kN	290 mm	mm